Floating Crystal Chainmaille Necklace

This necklace was featured in one of the beading or wire magazines several years ago; sorry - I can't be more specific than that - can't find the pattern anymore.

It uses 16g sterling silver rings, which are fairly large, and each unit "captures" an 6 mm Swarovski cube. I chose indicolite (one of my favorite colors). The crystal cubes appear to float in the weave, so it is called a floating crystal necklace.

I was so crazy about this look that I cut more rings, and made a matching bracelet and earrings.

Then the trouble started - the crystals don't want to stay where you put them.

They stay for a little while, but then they start to slip out of their "cages", sliding into the unit below them (gravity-wise) - and the more time they have, the more they make their escape! They turn sideways just a tiny bit from the position they are supposed to maintain, and can actually slip through 5 or 6 cages in one move if the cages below them are already empty. (I actually watched it happen)

About a week after I made this necklace, I decided to wear it, and discovered that almost all of the crystals had slipped out of place. I tried to manipulate them back into position without deconstructing the rings, but that didn't work. Weird, because the little chainmaille cages obviously weren't the tight fit they purported to be.... but anyway.

I toyed with the idea of taking it apart and re-doing it, but figured it would probably just do the same thing again, so why bother? So I ended up just taking it apart, and recycling the rings and crystals into other projects.

I followed the patterns instructions exactly - same gauge, same ID (inner diameter) -  not sure what the problem was. The crystals appeared to fit quite snugly into the little "cages" - and I really believe that if I had altered the AR (aspect ratio) at all, the cubes wouldn't have fit anymore.

Sigh ... I really loved this idea!

Crystal Cha Cha Bracelet

The more I look at the Swarovski crystal combination I used in this bracelet, the more I like it!

• Blue Zircon AB
• Violet Opal
• Light Azore AB 

Lots of wrapped loops, lots of bling - all on a gold cable chain.

Cha cha bracelets are one of my favorite things to make, and to wear - they make the sweetest sound when they move!

Crystal Lace Earrings

I had picked up some silver lacy chandelier findings at a bead store, and other than hanging dangles from them, I wasn't sure what to do with them. And then I thought: "Let's try weaving some crystals onto them."

I went with blue and green, one of my favorite color combos. They look a wee bit Christmas tree-y, but not so much in person as they do in this photo!

What do you think?

Horses and Leopards...?

I live in a town known for its Thoroughbred horses (Aiken, SC) - so I designed a few pieces of jewelry that are "horse-themed."

I turned this Art Clay Silver pendant featuring a horse into a dangly pendant by adding lots of blingy 4 and 6mm Swarovski crystals in 3 different colors of blue, swinging from sterling silver chain.

Then I built the necklace, using an airy, open sterling chain and links made from leopard skin jasper and freshwater pearls (and more crystals, of course!)

And matching earrings (leopard skin jasper, freshwater pearls, Swarovski crystals) complete the set!

New Copper and Swarovski Pendant

This is another piece I created in the metal studio last Sunday:

 Here is how the copper looked after all the cutting, drilling, and sanding, in preparation for adding the frame and crystals:

This pendant actually was inspired by a distressed, rust-colored frame that I found in the scrapbooking section of Michael's. Love the scrapbooking section! So many inspiring objects and fascinating tools and ingredients there!

I noticed how the frame matched a 20 mm Red Magma Swarovski Cosmic Square I had, both in color and in shape, and started designing the pendant on paper. Once everything fit and worked on the paper model, I cut the copper and did all the smoothing, sawing, and drilling.

Next, I textured the bail, then annealed it and rolled it into placed, then grommeted it to secure it. (The rivet is hidden in the front by the frame.)

Next, I placed the Swarovski Cosmic Square in the center, and then I attached the frame to the pendant. My initial plan had been to rivet the frame to the pendant, but the frame itself was way to thick for me to pierce, so I decided to do a little free-form wiring instead, adding Swarovski crystals (in Crystal Padparadscha) as I went. I love a little bling with my pendants!

So this is the back of the finished pendant, everything all tucked away and smooth!

And the pendant is available in my Etsy shop!

Carnelian Earrings

Faceteced carnelian, Swarovski crystals, an olive green freshwater  pearl, and sterling silver.

I finally finished a personal project!

I have taken better pictures in my day, but at least I am happy with my new necklace.

It all started when a bead vendor came to the shop about a month ago, and I snagged this gorgeous fluorite specimen from a strand of fluorite that consisted otherwise of much smaller, though still gorgeous, fluorite beads - this big one just stood out too much, so I just had to take it, don't you see?

I spent a few hours looking around the shop for other odds and ends to pair with it.

I have always wanted to use one of these sterling silver mesh beads (I call them tumbleweeds) that I nabbed at a GL&W show in Franklin, NC 2 years ago. I have had these beads for 2 years, and never used them, and they are luscious! I actually took them all out of my personal stash and out them up for sale in the shop last week, and no one has purchased any yet, so now I have used the first one.

I found a few stray teal freshwater pearls that really make the fluorite "pop."

I found a huge white freshwater pearl that I loved, and some smaller white button freshwater pearls, and some Swarovski pearls in various blue and green hues.

I've had this gorgeous sterling silver connector with 3 rings on the bottom in the shop for ages - and again, I think I'm the first to use one. Once I started dangling things, the opening in the middle of the connector just seemed to cry out to be filled, and I found this great hammered sterling disc that fit in there perfectly.

So I set about making my dangles, and attaching them to chain, and it took 2 full days to get everything hanging at the right lengths and positions to satisfy my eye. Late yesterday (after the shop had already closed, actually) I attached the bail, and found a rolo chain with a great look and weight to carry off my new "pendant", and I am just right pleased with myself about now.

And while all this was going on, I decided to look up the metaphysical properties of fluorite - and that made me feel even better about this whole combo. I have never put a lot of stock in this kind of stuff, but I liked what I read, and I figure it can't hurt...

According to what I read, fluorite is considered one of nature's most powerful mental healers (and goodness knows, I could use some of that about now). Fluorite allegedly has the ability to influence the activities that occur on the mental plane of consciousness and to amplify, focus, expand, and create new pathways for the mind. Fluorite is also believed to connect a person’s being on the mental and spiritual plane. This allows it to increase abilities of concentration, discernment of truth and clear decision-making. Other properties include bringing order to mental chaos, increasing objectivity, enhancing creativity, curing mental disorders, easing meditation and freeing one from bad habits.

The many colors of fluorite are believed to have different mental healing specialties. Green can energize and still the heart and mind. Blue is for inner peace. Purple is for focus and helping to get one out of a mental rut. Yellow is for comprehension and group communication and dynamics. White is for creating pathways between the individual and universal spirit.

I take all this with a grain of salt, but like I said, it can't hurt!